Ortur Laser Master 2 Pro S2 & Aufero Laser 2 Materials Reference

(S=Strength, 1000=100%)

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.
It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

Aufero Laser 1 Materials Reference

(S=Strength, 1000=100%)

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest.
It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or previous to light, etc. Then, you need to use the marker pen to black it to engrave.

Ortur Materials Reference

M3=Cutting Mode, M4=Engraving Mode, Conversion Tool: Line to Line Tracing
(S=Strength, 1000=100%)

Materials	LU2-2 (≤2.1W)	LU2-4-SF/LF (=5W)	LU2-10A (=10W)	LU3-20A/B (=20W)
MDF	3000mm/min, M4, S700, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S400, 8Lines/mm
Plywood	3000mm/min, M4, S700, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	15000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S800, 8Lines/mm
Pine	3000mm/min, M4, S700, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 8Lines/mm
Paulownia	3000mm/min, M4, S700, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S700, 10Lines/mm	20000mm/min, M4, S400, 8Lines/mm
Paperboard (Cardboard Box)	3000mm/min, M4, S1000, 12Lines/mm	9000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S700, 10Lines/mm	20000mm/min, M4, S350, 8Lines/mm
A4 Paper (Not White)	3000mm/min, M4, S600, 12Lines/mm	9000mm/min, M4, S1000, 15Lines/mm	3000mm/min, M4, S150, 10Lines/mm	20000mm/min, M4, S350, 8Lines/mm
Kraft Paper 250g	2000mm/min, M4, S100, 12Lines/mm	9000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S600, 10Lines/mm	10000mm/min, M4, S1000, 8Lines/mm
Leather	3000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S600, 10Lines/mm	20000mm/min, M4, S300, 8Lines/mm
Black Acrylic	2000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S500, 8Lines/mm
Cobblestone	100mm/min, M4, S1000, 15Lines/mm	1000mm/min, M4, S1000, 15Lines/mm	1000mm/min, M4, S250, 10Lines/mm	2000mm/min, M4, S1000, 8Lines/mm
Ceramics	500mm/min, M4, S1000, 15Lines/mm	1000mm/min, M4, S1000, 15Lines/mm	5000mm/min, M4, S1000, 20Lines/mm	10000mm/min, M4, S1000, 15Lines/mm
Coated Metal	2500mm/min, M4, S1000, 15Lines/mm	6000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S250, 10Lines/mm	20000mm/min, M4, S250, 8Lines/mm
Plated Metal	100mm/min, M4, S1000, 15Lines/mm	100mm/min, M4, S1000, 15Lines/mm	1000mm/min, M4, S250, 10Lines/mm	8000mm/min, M4, S1000, 8Lines/mm
Stainless Steel	×	100mm/min, M4, S1000, 15Lines/mm	2000mm/min, M4, S1000, 10Lines/mm	4000mm/min, M4, S1000, 10Lines/mm
Glass	500mm/min, M4, S1000, 15Lines/mm	1500mm/min, M4, S1000, 15Lines/mm	5000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 8Lines/mm
Knit	4000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S500, 8Lines/mm
Cotton	4000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S500, 8Lines/mm
ABS Plastics	4000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 15Lines/mm	20000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S500, 8Lines/mm
Bamboo	3000mm/min, M4, S1000, 15Lines/mm	7000mm/min, M4, S1000, 15Lines/mm	15000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S650, 8Lines/mm
Silica Gel	400mm/min, M4, S1000, 15Lines/mm	1000mm/min, M4, S1000, 15Lines/mm	2000mm/min, M4, S1000, 10Lines/mm	4000mm/min, M4, S1000, 8Lines/mm
Rubber	2000mm/min, M4, S1000, 15Lines/mm	5000mm/min, M4, S1000, 15Lines/mm	10000mm/min, M4, S1000, 10Lines/mm	20000mm/min, M4, S1000, 8Lines/mm
Ceramic Tile	2000mm/min, M4, S1000, 15Lines/mm	4000mm/min, M4, S1000, 15Lines/mm	8000mm/min, M4, S1000, 10Lines/mm	16000mm/min, M4, S1000, 8Lines/mm
Tin Lead Ore	×	×	×	×
Copper	×	×	×	×
Silver	×	×	×	×
Gold	×	×	×	×
Pure Aluminum	×	×	×	×
Soap	×	×	×	×
White Foam	×	×	×	×
Transparent Acrylic	×	×	×	×

Materials (Thickness)	LU2-2 (≤2.1W)	LU2-4-SF/LF (=5W)	LU2-10A (=10W)	LU3-20A/B (=20W)
♦ MDF 3mm	×	200mm/min, M3, S1000 Perform Multiple Passes: 4	250mm/min, M3, S1000 Perform Multiple Passes: 2	400mm/min, M3, S1000 Perform Multiple Passes: 2
5mm	×	200mm/min, M3, S1000 Perform Multiple Passes: 10	250mm/min, M3, S1000 Perform Multiple Passes: 3	600mm/min, M3, S1000 Perform Multiple Passes: 3
♦ Plywood 1.6mm	×	300mm/min, M3, S1000 Perform Multiple Passes: 1	500mm/min, M3, S1000 Perform Multiple Passes: 1	800mm/min, M3, S1000 Perform Multiple Passes: 1
2.8mm	×	300mm/min, M3, S1000 Perform Multiple Passes: 1	300mm/min, M3, S1000 Perform Multiple Passes: 1	500mm/min, M3, S1000 Perform Multiple Passes: 1
5mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 1	300mm/min, M3, S1000 Perform Multiple Passes: 1	350mm/min, M3, S1000 Perform Multiple Passes: 1
8mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 1	200mm/min, M3, S1000 Perform Multiple Passes: 1
10mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 8	250mm/min, M3, S1000 Perform Multiple Passes: 2
15mm	×	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 2
♦ Pine 3mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 1	500mm/min, M3, S1000 Perform Multiple Passes: 1	500mm/min, M3, S1000 Perform Multiple Passes: 1
5mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 1	200mm/min, M3, S1000 Perform Multiple Passes: 1	400mm/min, M3, S1000 Perform Multiple Passes: 1
8mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 3	100mm/min, M3, S1000 Perform Multiple Passes: 1	200mm/min, M3, S1000 Perform Multiple Passes: 1
10mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 2	150mm/min, M3, S1000 Perform Multiple Passes: 1
12mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 3	100mm/min, M3, S1000 Perform Multiple Passes: 1
15mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 5	100mm/min, M3, S1000 Perform Multiple Passes: 2
19mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 8	100mm/min, M3, S1000 Perform Multiple Passes: 2
♦ Paulownia 3mm	×	400mm/min, M3, S1000 Perform Multiple Passes: 1	800mm/min, M3, S1000 Perform Multiple Passes: 1	600mm/min, M3, S1000 Perform Multiple Passes: 1
5mm	×	250mm/min, M3, S1000 Perform Multiple Passes: 2	300mm/min, M3, S1000 Perform Multiple Passes: 1	400mm/min, M3, S1000 Perform Multiple Passes: 1
8mm	×	200mm/min, M3, S1000 Perform Multiple Passes: 2	200mm/min, M3, S1000 Perform Multiple Passes: 1	300mm/min, M3, S1000 Perform Multiple Passes: 1
10mm	×	150mm/min, M3, S1000 Perform Multiple Passes: 3	200mm/min, M3, S1000 Perform Multiple Passes: 4	250mm/min, M3, S1000 Perform Multiple Passes: 1
12mm	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 5	200mm/min, M3, S1000 Perform Multiple Passes: 1
15mm	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 6	100mm/min, M3, S1000 Perform Multiple Passes: 1
♦ Cardboard Grey 3mm	×	×	300mm/min, M3, S1000 Perform Multiple Passes: 1	300mm/min, M3, S1000 Perform Multiple Passes: 1
6mm	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 5	300mm/min, M3, S1000 Perform Multiple Passes: 2
♦ Cardboard White 3mm	×	×	400mm/min, M3, S1000 Perform Multiple Passes: 1	200mm/min, M3, S1000 Perform Multiple Passes: 1
5mm	×	×	300mm/min, M3, S1000 Perform Multiple Passes: 5	200mm/min, M3, S1000 Perform Multiple Passes: 2
♦ Black Acrylic 5mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 3	100mm/min, M3, S1000 Perform Multiple Passes: 3	100mm/min, M3, S1000 Perform Multiple Passes: 1
8mm	×	×	70mm/min, M3, S1000 Perform Multiple Passes: 6	70mm/min, M3, S1000 Perform Multiple Passes: 2
15mm	×	×	×	50mm/min, M3, S1000 Perform Multiple Passes: 2
20mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 11	100mm/min, M3, S1000 Perform Multiple Passes: 5
25mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 14	100mm/min, M3, S1000 Perform Multiple Passes: 8
30mm	×	×	100mm/min, M3, S1000 Perform Multiple Passes: 19	100mm/min, M3, S1000 Perform Multiple Passes: 12
♦ PVC 3mm	×	500mm/min, M3, S1000 Perform Multiple Passes: 1	1000mm/min, M3, S1000 Perform Multiple Passes: 1	1000mm/min, M3, S1000 Perform Multiple Passes: 1
5mm	×	100mm/min, M3, S1000 Perform Multiple Passes: 1	700mm/min, M3, S1000 Perform Multiple Passes: 1	600mm/min, M3, S1000 Perform Multiple Passes: 1
7mm	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 3	400mm/min, M3, S1000 Perform Multiple Passes: 1
♦ Leather 2mm	×	×	300mm/min, M3, S1000 Perform Multiple Passes: 1	500mm/min, M3, S1000 Perform Multiple Passes: 1
A4 Paper	1000mm/min, M3, S1000 Perform Multiple Passes: 1	2500mm/min, M3, S1000 Perform Multiple Passes: 1	4500mm/min, M3, S1000 Perform Multiple Passes: 1	8000mm/min, M3, S1000 Perform Multiple Passes: 1
Knit	×	500mm/min, M3, S1000 Perform Multiple Passes: 1	1000mm/min, M3, S1000 Perform Multiple Passes: 1	2000mm/min, M3, S1000 Perform Multiple Passes: 1
Cotton	×	500mm/min, M3, S1000 Perform Multiple Passes: 1	1000mm/min, M3, S1000 Perform Multiple Passes: 1	2000mm/min, M3, S1000 Perform Multiple Passes: 1
ABS Plastics	×	500mm/min, M3, S1000 Perform Multiple Passes: 1	1000mm/min, M3, S1000 Perform Multiple Passes: 1	2000mm/min, M3, S1000 Perform Multiple Passes: 1
Bamboo	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 10	100mm/min, M3, S1000 Perform Multiple Passes: 3
Silica Gel	×	×	200mm/min, M3, S1000 Perform Multiple Passes: 8	100mm/min, M3, S1000 Perform Multiple Passes: 4

Materials	LU2-2 (≤2.1W)	LU2-4-SF/LF (=5W)	LU2-10A (=10W)	LU3-20A/B (=20W)
MDF	3000mm/min, P70, 0.07mm	10000mm/min, P100, 0.05mm	20000mm/min, P100, 0.07mm	20000mm/min, P40, 0.12mm
Plywood	3000mm/min, P70, 0.07mm	10000mm/min, P100, 0.05mm	15000mm/min, P100, 0.1mm	20000mm/min, P80, 0.12mm
Pine	3000mm/min, P70, 0.07mm	10000mm/min, P100, 0.05mm	20000mm/min, P100, 0.07mm	20000mm/min, P100, 0.12mm
Paulownia	3000mm/min, P70, 0.07mm	10000mm/min, P100, 0.05mm	20000mm/min, P70, 0.1mm	20000mm/min, P40, 0.12mm
Paperboard (Cardboard Box)	3000mm/min, P100, 0.06mm	9000mm/min, P100, 0.05mm	20000mm/min, P70, 0.1mm	20000mm/min, P35, 0.12mm
A4 Paper (Not White)	3000mm/min, P60, 0.06mm	9000mm/min, P100, 0.05mm	3000mm/min, P15, 0.05mm	20000mm/min, P35, 0.12mm
Kraft Paper 250g	2000mm/min, P100, 0.06mm	9000mm/min, P100, 0.05mm	20000mm/min, P60, 0.05mm	10000mm/min, P100, 0.12mm
Leather	3000mm/min, P100, 0.07mm	10000mm/min, P100, 0.05mm	20000mm/min, P60, 0.1mm	20000mm/min, P30, 0.12mm
Black Acrylic	2000mm/min, P100, 0.07mm	10000mm/min, P100, 0.05mm	20000mm/min, P100, 0.1mm	20000mm/min, P50, 0.12mm
Cobblestone	100mm/min, P100, 0.07mm	100mm/min, P100, 0.05mm	1000mm/min, P25, 0.1mm	2000mm/min, P100, 0.12mm
Ceramics	500mm/min, P100, 0.07mm	1000mm/min, P100, 0.07mm	5000mm/min, P100, 005mm	10000mm/min, P100, 0.07mm
Coated Metal	2500mm/min, P100, 0.07mm	6000mm/min, P100, 0.07mm	10000mm/min, P25, 0.1mm	20000mm/min, P25, 0.12mm
Plated Metal	100mm/min, P100, 0.07mm	100mm/min, P100, 0.05mm	1000mm/min, P25, 0.05mm	8000mm/min, P100, 0.12mm
Stainless Steel	×	100mm/min, P100, 0.05mm	2000mm/min, P100, 0.05mm	4000mm/min, P100, 0.1mm
Glass	500mm/min, P100, 0.07mm	1500mm/min, P100, 0.07mm	5000mm/min, P100, 0.07mm	10000mm/min, P100, 0.12mm
Knit	4000mm/min, P100, 0.07mm	10000mm/min, P100, 0.07mm	20000mm/min, P100, 0.1mm	20000mm/min, P50, 0.12mm
Cotton	4000mm/min, P100, 0.07mm	10000mm/min, P100, 0.07mm	20000mm/min, P100, 0.1mm	20000mm/min, P50, 0.12mm
ABS Plastics	4000mm/min, P100, 0.07mm	10000mm/min, P100, 0.07mm	20000mm/min, P100, 0.1mm	20000mm/min, P50, 0.12mm
Bamboo	3000mm/min, P100, 0.07mm	7000mm/min, P100, 0.07mm	15000mm/min, P100, 0.1mm	20000mm/min, P65, 0.12mm
Silica Gel	400mm/min, P100, 0.07mm	1000mm/min, P100, 0.07mm	2000mm/min, P100, 0.1mm	4000mm/min, P100, 0.12mm
Rubber	2000mm/min, P100, 0.07mm	5000mm/min, P100, 0.07mm	10000mm/min, P100, 0.1mm	20000mm/min, P100, 0.12mm
Ceramic Tile	2000mm/min, P100, 0.07mm	4000mm/min, P100, 0.07mm	8000mm/min, P100, 0.1mm	16000mm/min, P100, 0.12mm
Tin Lead Ore	×	×	×	×
Copper	×	×	×	×
Silver	×	×	×	×
Gold	×	×	×	×
Pure Aluminum	×	×	×	×
Soap	×	×	×	×
White Foam	×	×	×	×
Transparent Acrylic	×	×	×	×

Materials	LU2-2 (≤2.1W)	LU2-4-SF/LF (=5W)	LU2-10A (=10W)	LU3-20A/B (=20W)
♦ MDF 3mm	×	200mm/min, P100, Pass Count: 4	250mm/min, P100, Pass Count: 2	400mm/min, P100, Pass Count: 2
5mm	×	200mm/min, P100, Pass Count: 10	250mm/min, P100, Pass Count: 3	600mm/min, P100, Pass Count: 3
♦ Plywood 1.6mm	×	300mm/min, P100, Pass Count: 1	500mm/min, P100, Pass Count: 1	800mm/min, P100, Pass Count: 1
2.8mm	×	300mm/min, P100, Pass Count: 1	300mm/min, P100, Pass Count: 1	500mm/min, P100, Pass Count: 1
5mm	×	100mm/min, P100, Pass Count: 1	300mm/min, P100, Pass Count: 1	350mm/min, P100, Pass Count: 1
8mm	×	×	100mm/min, P100, Pass Count: 1	200mm/min, P100, Pass Count: 1
10mm	×	×	100mm/min, P100, Pass Count: 8	250mm/min, P100, Pass Count: 2
15mm	×	×	×	200mm/min, P100, Pass Count: 2
♦ Pine 3mm	×	150mm/min, P100, Pass Count: 1	500mm/min, P100, Pass Count: 1	500mm/min, P100, Pass Count: 1
5mm	×	100mm/min, P100, Pass Count: 1	200mm/min, P100, Pass Count: 1	400mm/min, P100, Pass Count: 1
8mm	×	100mm/min, P100, Pass Count: 3	100mm/min, P100, Pass Count: 1	200mm/min, P100, Pass Count: 1
10mm	×	×	100mm/min, P100, Pass Count: 2	150mm/min, P100, Pass Count: 1
12mm	×	×	100mm/min, P100, Pass Count: 3	100mm/min, P100, Pass Count: 1
15mm	×	×	100mm/min, P100, Pass Count: 5	100mm/min, P100, Pass Count: 2
19mm	×	×	100mm/min, P100, Pass Count: 8	100mm/min, P100, Pass Count: 2
♦ Paulownia 3mm	×	400mm/min, P100, Pass Count: 1	800mm/min, P100, Pass Count: 1	600mm/min, P100, Pass Count: 1
5mm	×	250mm/min, P100, Pass Count: 2	300mm/min, P100, Pass Count: 1	400mm/min, P100, Pass Count: 1
8mm	×	200mm/min, P100, Pass Count: 2	200mm/min, P100, Pass Count: 1	300mm/min, P100, Pass Count: 1
10mm	×	150mm/min, P100, Pass Count: 3	200mm/min, P100, Pass Count: 4	250mm/min, P100, Pass Count: 1
12mm	×	×	200mm/min, P100, Pass Count: 5	200mm/min, P100, Pass Count: 1
15mm	×	×	200mm/min, P100, Pass Count: 6	100mm/min, P100, Pass Count: 1
♦ Cardboard Grey 3mm	×	×	300mm/min, P100, Pass Count: 1	300mm/min, P100, Pass Count: 1
6mm	×	×	200mm/min, P100, Pass Count: 5	300mm/min, P100, Pass Count: 2
♦ Cardboard White 3mm	×	×	400mm/min, P100, Pass Count: 1	200mm/min, P100, Pass Count: 1
5mm	×	×	300mm/min, P100, Pass Count: 5	200mm/min, P100, Pass Count: 2
♦ Black Acrylic 5mm	×	100mm/min, P100, Pass Count: 3	100mm/min, P100, Pass Count: 3	100mm/min, P100, Pass Count: 1
8mm	×	×	100mm/min, P100, Pass Count: 4	100mm/min, P100, Pass Count: 2
15mm	×	×	×	50mm/min, P100, Pass Count: 2
20mm	×	×	100mm/min, P100, Pass Count: 11	100mm/min, P100, Pass Count: 5
25mm	×	×	100mm/min, P100, Pass Count: 14	100mm/min, P100, Pass Count: 8
30mm	×	×	100mm/min, P100, Pass Count: 19	100mm/min, P100, Pass Count: 12
♦ PVC 3mm	×	500mm/min, P100, Pass Count: 1	1000mm/min, P100, Pass Count: 1	1000mm/min, P100, Pass Count: 1
5mm	×	100mm/min, P100, Pass Count: 1	700mm/min, P100, Pass Count: 1	600mm/min, P100, Pass Count: 1
7mm	×	×	200mm/min, P100, Pass Count: 1	400mm/min, P100, Pass Count: 1
Leather 2mm	×	×	300mm/min, P100, Pass Count: 1	500mm/min, P100, Pass Count: 1
A4 Paper	1000mm/min, P100, Pass Count: 1	2500mm/min, P100, Pass Count: 1	4500mm/min, P100, Pass Count: 1	8000mm/min, P100, Pass Count: 1
Knit	×	500mm/min, P100, Pass Count: 1	1000mm/min, P100, Pass Count: 1	2000mm/min, P100, Pass Count: 1
Cotton	×	500mm/min, P100, Pass Count: 1	1000mm/min, P100, Pass Count: 1	2000mm/min, P100, Pass Count: 1
ABS Plastics	×	500mm/min, P100, Pass Count: 1	1000mm/min, P100, Pass Count: 1	2000mm/min, P100, Pass Count: 1
Bamboo	×	×	200mm/min, P100, Pass Count: 10	100mm/min, P100, Pass Count: 3
Silica Gel	×	×	200mm/min, P100, Pass Count: 8	100mm/min, P100, Pass Count: 4

The results would be different in even the same material with different finishing or different colors. So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, and make the focal spot to be the smallest.
It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. You need to use the marker pen to black it to engrave.
When the laser engraver is working, the operator must pay close attention and not place it alone to prevent the-engraved material from catching fire. If possible, we recommend that you purchase a fire extinguisher and keep it close to the machine.
Please check the documentation of ortur, find the corresponding software tutorial, and modify the corresponding value.

Download (For LaserGRBL)Download (For Lightburn)

Table header 0	LU2-2	LU2-4-LF	LU2-4-SF	Remark
1.6mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 400mm/min,M3,S1000 Number of passes: 1	Cutting 300mm/min,M3,S1000 Number of passes: 1
2.8mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 150mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
4.06mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 130mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
5.18mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors, Better Results.
		Cutting 100mm/min,M3,S1000 Number of passes: 1	Cutting 150mm/min,M3,S1000 Number of passes: 1
5.96mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 100mm/min,M3,S1000 Number of passes:2	Cutting 100mm/min,M3,S1000 Number of passes: 1
7.85mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results 【Reduce the focal length by 2-3mm during cutting】
		Cutting 100mm/min,M3,S1000 Number of passes:9	Cutting 100mm/min,M3,S1000 Number of passes:12
3.06mm Tung wood board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 500mm/min,M3,S1000 Number of passes: 1	Cutting 400mm/min,M3,S1000 Number of passes: 1
5.15mm Tung wood board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 150mm/min,M3,S1000 Number of passes: 1	Cutting 250mm/min,M3,S1000 Number of passes: 2
8.30mm Tung wood board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 250mm/min,M3,S1000 Number of passes: 3	Cutting 200mm/min,M3,S1000 Number of passes: 2
10mm Tung wood board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 150mm/min,M3,S1000 Number of passes: 2	Cutting 150mm/min,M3,S1000 Number of passes:3
6mm Pine board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 150mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
9mm Pine board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Darker Colors Better Results
		Cutting 100mm/min,M3,S1000 Number of passes: 3	Cutting 100mm/min,M3,S1000 Number of passes: 3
3mm Paperboard (Cardboard Box)	Engraving 3000mm/min,M4,S1000 12Lines/mm	Engraving 9000mm/min,M4,S400 15Lines/mm	Engraving 9000mm/min,M4,S400 15Lines/mm	Darker Colors Better Results
	Cutting 200mm/min,S1000 Number of passes: 2	Cutting 500mm/min,M3,S1000 Number of passes: 1	Cutting 500mm/min,M3,S1000 Number of passes: 1
0.1mm Colored A4 Paper (Not White)	Engraving 3000mm/min,M4,S600 12Lines/mm	Engraving 9000mm/min,M4,S350 15Lines/mm	Engraving 9000mm/min,M4,S350 15Lines/mm	The white paper is nonopaque, the result is not very good.
	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cutting 3000mm/min,M3,S1000 Number of passes: 1	Cutting 3000mm/min,M3,S1000 Number of passes: 1
250g Kraft Paper	Engraving 2000mm/min,M4,S100 12Lines/mm	Engraving 9000mm/min,M4,S500 15Lines/mm	Engraving 9000mm/min,M4,S500 15Lines/mm	Darker Colors Better Results
	Cutting 200mm/min,M3,S1000 Number of passes: 1	Cutting 1000mm/min,M3,S1000 Number of passes: 1	Cutting 1000mm/min,M3,S1000 Number of passes: 1
0.7MM Leather	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm
	Cutting 100mm/min,M3,S1000 Number of passes: 1	Cutting 800mm/min,M3,S1000 Number of passes: 1	Cutting 800mm/min,M3,S1000 Number of passes: 1
Non-woven fabrics (0.5mm, Dark Color)	Cutting 500mm/min,M3,S1000 Number of passes: 1	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cannot cut the white one, it's transparent in fact.
5mm Acrylic	Engraving 2000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Need coat the dark color paper onto the transparent Acrylic plate.
	×	Cutting 100mm/min,M3,S1000 Number of passes: 2	Cutting 100mm/min,M3,S1000 Number of passes: 3
Tin Wire	Melting	Melting	Melting	Cannot engrave.
Cobblestone	×	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Need coated with acrylic dye heat transfer film.
Ceramic	×	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Need coated with acrylic dye heat transfer film.
Powder Coated MetalPaint Sprayed Metal	Engraving 2000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraving 10000mm/min,M4,S1000 15Lines/mm	Engraved in the layer of powder coating.
Plated Metal	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Anodised Aluminium	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Stainless Steel	×	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Copper	×	×	×
Pure aluminum	×	×	×
Gold	×	×	×
Silver	×	×	×

Table header 0	LU2-2	LU2-4-LF	LU2-4-SF	Remark
1.6mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Darker Colors Better Results
		Cutting 400mm/min,M3,S1000 Number of passes: 1	Cutting 300mm/min,M3,S1000 Number of passes: 1
2.8mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Darker Colors Better Results
		Cutting 150mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
4mm Plywood Plate	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Darker Colors Better Results
		Cutting 130mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
6mm Pine board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Darker Colors, Better Results.
		Cutting 150mm/min,M3,S1000 Number of passes: 1	Cutting 100mm/min,M3,S1000 Number of passes: 1
9mm Pine board	Engraving 2000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Engraving 3000mm/min,M4,S500 15Lines/mm	Darker Colors Better Results
		Cutting 100mm/min,M3,S1000 Number of passes:3	Cutting 100mm/min,M3,S1000 Number of passes: 3
3mm Paperboard (Cardboard Box)	Engraving 3000mm/min,M4,S1000 12Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	Darker Colors Better Results
	Cutting 200mm/min,S1000 Number of passes:2	Cutting 500mm/min,M3,S1000 Number of passes:1	Cutting 500mm/min,M3,S1000 Number of passes:1
0.1mm Colored A4 Paper (Not White)	Engraving 3000mm/min,M4,S600 12Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	The white paper is nonopaque, the result is not very good.
	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cutting 3000mm/min,M3,S1000 Number of passes: 1	Cutting 3000mm/min,M3,S1000 Number of passes: 1
250g Kraft Paper	Engraving 2000mm/min,M4,S100 12Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	Engraving 3000mm/min,M4,S300 15Lines/mm	Darker Colors Better Results
	Cutting 200mm/min,M3,S1000 Number of passes: 1	Cutting 1000mm/min,M3,S1000 Number of passes: 1	Cutting 1000mm/min,M3,S1000 Number of passes: 1
0.7MM Leather	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S600 15Lines/mm	Engraving 3000mm/min,M4,S600 15Lines/mm
	Cutting 100mm/min,M3,S1000 Number of passes: 1	Cutting 800mm/min,M3,S1000 Number of passes: 1	Cutting 800mm/min,M3,S1000 Number of passes: 1
5mm Acrylic	Engraving 2000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm	Need coat the dark color paper onto the transparent Acrylic plate.
		Cutting 100mm/min,M3,S1000 Number of passes: 2	Cutting 100mm/min,M3,S1000 Number of passes:3
Anodised Aluminium	Engraving 2000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm
Stainless Steel		Engraving 100mm/min,M4,S1000 15Lines/mm	Cutting 100mm/min,M3,S1000 Number of passes: 1
Non-woven fabrics (0.5mm, Dark Color)	Cutting 500mm/min,M3,S1000 Number of passes: 1	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cutting 1500mm/min,M3,S1000 Number of passes: 1	Cannot cut the white one, it's transparent in fact.
Tin Wire	Melting	Melting	Melting	Cannot engrave.
Cobblestone		Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Need coated with acrylic dye heat transfer film.
Ceramic		Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Need coated with acrylic dye heat transfer film.
Powder Coated Metal Paint Sprayed Metal	Engraving 2000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraving 3000mm/min,M4,S1000 15Lines/mm	Engraved in the layer of powder coating.
Plated Metal	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	Engraving 100mm/min,M4,S1000 15Lines/mm	The Glossy finishing surface should be painted black by Marker Pen.